Distributed 3D rendering was the first kind of work OmnibusCloud carried. Engineering simulation is the second. Three pieces are ready, each usable on its own, each on the machines your office already owns.
Try it
Nothing below needs an agreement or a conversation with us. An OmnibusCloud account, the client on a few machines, and a private group of your own are the whole setup: the client → · a private group →.
OmnibusCloud Solver for PrePoMax. Press Run as you always do; heat-transfer analyses go to your group's machines, everything else stays local. Free.
Download → · Guide → · Videos →
OmnibusCloud plugin for ParaView. Render any scene, animation or camera orbit on your group's machines; open CalculiX results with no account at all. Free.
Download → · Guide → · Overview video →
WitSweep. Open a CalculiX deck, a Nastran deck or an OpenFOAM case, point at the numbers, and every variant runs on a machine of your group. Windows, Linux and macOS. Thirty days with every feature, no license needed.
Download → · Guide → · Overview video →
Your office is already a cluster
Walk through an engineering office in the evening. Every workstation was bought for the working day, and from six until morning it sits warm and idle. OmnibusCloud puts those hours to work: a server coordinates the machines, an application sends work to them, and each task runs whole on one machine that happens to be free. Nothing is reserved in advance; allocation is by what is free right now.
Parameter studies are where this pays off first. A study is many independent runs of the same model, and independent runs spread across machines without any cleverness. One run goes as fast as the machine it lands on; a study of forty variants no longer waits in a single queue on a single desk.
The machines need nothing installed beyond the client. The solvers travel with their controllers, the modules that run a particular program on a machine, and are fetched and verified on first use.
Press Run in PrePoMax
The solver is a single executable that takes the place of CalculiX in PrePoMax's settings. PrePoMax is unchanged; you press the same Run button and read results in the same Results view.
What changes is where a heat-transfer analysis runs. A steady one is split across the machines of your group by a Schwarz-type method; a transient one, when the step carries its time data, is advanced in time slabs by Parareal, with the machines correcting each other until the whole history is consistent. The monitor names the group and the method, and the result comes back as PrePoMax expects it.
Analyses outside that set, a static stress analysis for instance, are solved by PrePoMax's own CalculiX on your machine, as before, with a line in the monitor naming the reason. Switching solvers never costs you a run.
Render in ParaView
The plugin adds two things to ParaView. A reader for CalculiX .frd results, which works with no account and no network. And a way to render what is on your screen on the machines of your group: a still, an animation through the time steps, a camera orbit around the model. The plugin captures the session, data, filters and camera as they stand, and the machines render the frames in parallel; the images, or the finished video, come back to you.
The controller brings its own ParaView, so a machine in your group needs nothing but the client. The readers and filters a session may contain are listed in the guide.
Run a study in WitSweep
WitSweep is a desktop application for parameter studies. It opens a CalculiX deck, a Nastran deck or an OpenFOAM case, lets you click the numbers you want to vary, builds the variants and runs each one whole on a machine of your group. The responses you name come back in one table, with a scatter or a histogram when the study calls for one.
A study can vary one number at a time, take the full factorial of several, or sample them: Monte Carlo and Latin hypercube, for the question "of a hundred brackets within tolerance, how many reach yield". A folder of ready decks or cases is a study too, run as it is. Any variant opens back in PrePoMax or in ParaView, and a whole study goes to ParaView in one step. Close the application and the study runs on; open it later and the results are there.
WitSweep runs CalculiX and OpenFOAM today because both are open and travel inside open controllers. The study itself is not tied to either, and a new solver arrives as a new controller.
What is open and what is not
The controllers that run CalculiX, OpenFOAM and ParaView are open source, as are the Blender and 3ds Max plugins. The client, the PrePoMax solver and the ParaView plugin are free. WitSweep is a commercial application with a thirty-day demo. The engine and the server are not open.
A server of your own
Everything above runs on the public OmnibusCloud, where your work goes only to the machines of your own group. Companies whose models cannot pass through a shared server run the same system on a server of their own, on the internet or inside their office. Your own OmnibusCloud →
What comes next
More controllers, more integrations, more applications: the same machines take on more kinds of work, and they stay where they are. If your work needs something that is not here yet, say so. Questions, results and requests: r/OmnibusCloud →.
PrePoMax is free software by Matej Borovinšek. ParaView is developed by Kitware. OpenFOAM® is a registered trademark of OpenCFD Limited. OmnibusCloud is not affiliated with or endorsed by any of them.